Flex Innovations Mamba 120cc RC Plane, ARF, Yellow

Article number: FPM1600
Availability: Out of stock


The Flex Innovations Mamba 120 is a lightweight 3D/aerobatic RC biplane that was designed by Quique Somenzini. Thanks to his knowledge and attention to detail, the Mamba 120 gives you a biplane experience that you can't get anywhere else.



  • Designed by Quique Somenzini
  • Laminated carbon fibre, fibreglass, plywood and balsa structure keeps the model lightweight, yet incredibly strong.
  • Horizontal stabilizers are easily removed and the elevator servos are mounted in the stabs no flying wires and no linkages to disconnect for transport
  • Airfoiled tail surfaces provide enhanced flight performance and strength
  • Interplane struts are quickly assembled or disassembled thanks to the retention pin design.
  • Carbon fibre landing gear included in the box
  • Two piece cowling for easier engine access
  • Pre-cut engine baffling for the DA-120 is included
  • Lightweight "soda bottle" style fuel tank included
  • Large main hatch with auxilliary forward hatch provide easy access to the fuel system and other components
  • Quick to assemble! Hinges and control horns (where possible) are installed by the factory.
  • Custom G10 Control Horns for Optimized Throw and Precision
  • Painted fibreglass wheel pants and cowling
  • Factory applied trim scheme

Product Information

Years of F3A and 3D biplane experience give Quique Somenzini the knowledge to design the Mamba to fly just right. Starting with a Model 12 that is officially licensed from Jim Kimball Enterprises, Quique made a variety of changes to improve and perfect the Mamba 120 as a 3D aerobatic model.

The Flex Innovations Mamba 120 excels in light wing loading and absolute minimum control coupling that are important in providing exceptional 3D performance.


What you need

  • 8+ channel transmitter
  • 8+ channel receiver, high-voltage capable
  • (8) Servos
    • (7) for control surfaces
    • (1) for throttle
  • Servo arms
    • (4) Aileron: 2-inch single
    • (2) Elevator: 2-inch single
    • (1) Rudder: 4-inch double sided
  • (9) Servo extensions
    • (3) 900 mm 
    • (2) 350 mm 
    • (2) 200 mm 
    • (2) 1250 mm
  • (2) 2S LiPo 2000mah 15C+ receiver battery
  • (1) 2S LiPo 2000mah 15C+ ignition battery
  • 100cc to 125cc gasoline engine with suitable exhaust
  • (4) Engine standoffs
  • 140mm spinner and suitable propeller
0 stars based on 0 reviews